Avaya S8100 Series Manual page 315

Media Server MC (platform 6) before the upgrade, the type must be 8700 Media Server
MC (platform 6) after the upgrade.
Effective with CM 3.0, Internet Protocol (IP) PNC (FEAT_IP_PNC in the RFA license file) is
●
always to set to OFF. After you install, migrate to, or upgrade the server, then this attribute
should appear as n (no) in the display-only Internet Protocol (IP) PNC field on page 4 of
the Communication Manager Customer Options screen.
Note:
The Internet Protocol (IP) PNC (FEAT_IP_PNC license attribute, before release
Note:
3.0, restricted port network connectivity (PNC) for each of the platforms. The OFF
setting previously restricted MC (platform 6) platforms from using IP-PNC. The
ON setting previously restricted IP (platform 8) platforms from using MC-PNC
configurations. With release 3.0, both of these restrictions were lifted.
Migration chapters
Migrating to an Avaya S8400 Media Server
●
Migrating to an Avaya S8500 Media Server
●
Migrating to an Avaya S8700-Series Media Server
●
on page 317
on page 443
on page 611
Issue 2.1 June 2006
Migration chapters
315