Avaya S8100 Series Manual page 1228

Converting software duplication link to a DAL1 link on an S8720 Media Server
Figure 107: Insert the DAL1 circuit pack
Figure notes:
Slide the DAL1 board into the
1.
slot above the quad-NIC circuit
pack.
2. Secure the board in the slot by
tightening the thumb screw.
Replacing the riser assembly
To replace the riser assembly:
1. Align the three tabs of the riser assembly with the guides on the server chassis as shown in
Figure 108.
1228 Upgrading, Migrating, and Converting Media Servers and Gateways
2
3
Close the locking lever.
3.
1
h3dsdali LAO 102505