Avaya S8100 Series Manual page 586

Migrating an Avaya IP600/S8100 to an S8500 Media Server
You also need the following Additional documentation:
Document
Quick Start for Hardware
Installation: Avaya S8500
Media Server (555-245-701)
Installing and Configuring
the Avaya S8500 Media
Server (03-300143)
Administration for Network
Connectivity for Avaya
Communication Manager
(555-233-504)
Migration tasks
The information in this section is based on the assumption that the media server complex is
installed, configured, and operational.
!
CAUTION:
This migration affects service. When the PPN is turned off, the system drops all
CAUTION:
calls. Service returns when the media server takes control of the IPSIs.
The following list describes the general migration procedures:
Turn off the processor gracefully - pre-conversion administration
●
Replace the processor circuit pack or tone clock circuit pack with an IP Server Interface
●
(IPSI) circuit pack
Connect the IPSI circuit pack to the Ethernet switch on the customer network
●
Assign an IP address to the IPSI circuit pack
●
You can reuse the translations from the existing system when you migrate to an S8500 Media
Server.
Note:
You must install the new Communication Manager license file on the media
Note:
server before you make the change or the system will not run.
586 Upgrading, Migrating, and Converting Media Servers and Gateways
Description
A quick reference guide that provides physical installa-
tion and connection information
Provides installation instructions for the S8500 Media
.
Server
Provides information on network connectivity
.
.