Avaya S8100 Series Manual page 940

Migrating from an S8700 or S8710 Media Server to an S8720 Media Server
Presite migration checklist
Before you go on site, complete the following tasks:
Task
Verify that the voice network,
dial plan, and E911 for remote
locations were redesigned.
Verify that all existing circuit
packs work with the new
system.
Replace any TN799B/C C-LAN
circuit packs.
Replace the 259A adapter and
the CAT3 cable.
Replace TN570 EI circuit packs.
Before you go on site for a migration from a system, complete the following additional tasks
before starting the migration:
Task
You might need to move the
UPSs and the Ethernet
switch(es) from the 2-post
rack to the 4-post rack.
940 Upgrading, Migrating, and Converting Media Servers and Gateways
Description
Perform this task only if applicable.
Check the Minimum Vintage Table. Go to the
Hardware and Software Compatibility Matrix at ftp//
ftp.avaya.com/incoming/Up1cku9/tsoweb/media/
minhardwarevintages.pdf.
Replace with the TN799DP circuit pack.
Replace with the cable extender adapter with
Comcode 848525887 and the CAT5 or better cable.
Replace with TN570B vintage 7 or later circuit packs.
Description
Ensure that you have:
A Philips screwdriver
●
Rail kits (700230741) for a 4-post rack for the
●
UPSs
Cage nuts to attach the screws to the rack, if
●
necessary
At least 2 people to lift the equipment
●