Avaya S8100 Series Manual page 462

Migrating a DEFINITY Server CSI in a CMC to an S8500 Media Server
Migration tasks
You can reuse the translations from the existing system when you migrate to an S8500 Media
Server.
Note:
You must install the new Communication Manager license file on the media
Note:
server before you make the change or the system will not run.
Verifying hardware
Ensure that you have the conversion specific hardware on hand.
Note:
The TN798 circuit pack or the TN2402 Processor circuit pack that contains the
Note:
Audix feature is replaced with a TN2312BP Internet Protocol Server Interface
(IPSI) circuit pack that does not have the Audix feature. You must return the
existing processor circuit pack to Avaya.
Note:
Customers also must add an ED-1E568-70G1 DEFINITY Audix Slim board and a
Note:
TN2501AP Voice Announcement over LAN (VAL) circuit pack for
announcements.
Changing the control cabinet to a port network
To change the control cabinet to a port network (PN):
1. Remove the TN798 or the TN2402 Processor circuit pack. Replace the TN2182 Tone Clock
circuit pack with a TN2312BP Internet Protocol Server Interface (IPSI) circuit pack.
2. Connect a CAT5 straight-through cable from the IPSI to the media server through the
customer network.
462 Upgrading, Migrating, and Converting Media Servers and Gateways