Avaya S8100 Series Manual page 842

Migrating an Avaya IP600/S8100 to an S8700-Series Media Server with IP-PNC
Task
Verify the correct cables for
the TN2312BP Internet
Protocol Server Interface
(IPSI) circuit packs.
Verify that you have all
necessary equipment
onsite.
When you are on site for a migration from a DEFINITY system, complete the following
additional tasks before you start the migration:
Task
The customer supplies an
EIA 310D (or equivalent)
standard 4-post, 19-inch
(48-centimeter), equipment
rack is installed correctly
and solidly secured.
Verify that cables for the
TN2312BP Internet Protocol
Server Interface (IPSI)
circuit packs are labeled
and that appropriate
connectivity is provided.
Verify that you have the
license file and that the file
includes the licensed
features.
Verify that you have the
Avaya authentication file.
842 Upgrading, Migrating, and Converting Media Servers and Gateways
Description
The cables must be labeled and run from the control
hardware rack to the port networks. Appropriate
connectivity must be provided.
For the list of required hardware, see Installing and
Configuring the Avaya S8700-Series Media Server
(03-300145).
Description
Ensure that you have the screws that come with the
rack. Ensure that the rail kit for the Avaya-supplied
UPS is installed on the rack or available for
installation. For more information on how to install the
rail, see the documentation that comes with the rail kit.
The TN2312BP Internet Protocol Server Interface
(IPSI) circuit packs runs from the control hardware
rack to the port networks.
Use the License File link on the Maintenance Web
Interface to verify.
Use the License File link on the Maintenance Web
Interface to verify.
2 of 2