Avaya S8100 Series Manual page 506

Migrating a DEFINITY Server SI Direct-Connect in an SCC to a Direct-Connect
4. To access the media server, type ping -t 192.11.13.6. Press Enter.
The -t causes the ping to repeat until you get a response. When you get a response, in
about 3 minutes, wait an additional 30 seconds before you go back to the Web interface.
5. To stop the ping, type ctrl c. Press Enter.
6. Close the MS-DOS window.
Logging in to the IPSI
To log in to the IPSI:
1. Use the PuTTY application to reaccess the server using the secure shell (SSH) protocol.
Note:
Most commands have abbreviations. For more help while you are connected to
Note:
the IPSI, you can type help or ?.
2. Type ipsilogin. Press Enter. The abbreviated command is il.
Note:
The craft login that you use on the IPSI has a different password than the craft
Note:
login used on the media servers.
3. Log in as craft.
Prompt = [IPADMIN]:
Setting the control interface
To set the control interface:
1. Type show control interface. Press Enter.
2. To see the current settings, type show port 1. Press Enter.
506 Upgrading, Migrating, and Converting Media Servers and Gateways