Avaya S8100 Series Manual page 1051

Resolving alarms
To clear alarms:
1. Under Alarms, click Current Alarms to examine the alarm log.
2. Select the server alarms that you want to clear and click Clear, or click Clear All.
3. Resolve or clear Communication Manager alarms with SAT commands and the
Maintenance Commands Reference and Alarms Maintenance books.
Disabling scheduled maintenance with the SAT (main server only)
To prevent scheduled daily maintenance from interfering with the upgrade:
1. Type change system-parameters maintenance and press Enter.
2. Perform one of the following actions:
If scheduled maintenance is in progress, set the Stop Time field to 1 minute after the
●
current time.
If scheduled maintenance is not in progress, set the Start Time field to a time after the
●
upgrade is completed.
For example, if you start the upgrade at 8:00 p.m. and the upgrade takes 4 hours, set the
Start Time field to 23:59.
Backing up recovery system files
To back up the system configuration files:
1. Under Data Backup/Restore, click Backup Now.
2. Select the data sets, including Avaya Call Processing (ACP) translations and Save ACP
translations prior to backup. Do not select Full Backup because this option does not
save translations.
Note:
If you back up to a flashcard, Avaya recommends that you use a different
Note:
flashcard from the one with the prior release translations. You might need these
translations if you need to back out of the upgrade, migration, or conversion
procedure.
3. Select the backup method.
4. Click Start Backup to start the back up process.
Preconversion tasks
Issue 2.1 June 2006 1051