Avaya S8100 Series Manual page 886

Migrating an S8500 Media Server to an S8710 Media Server
10. Log in to both media servers from anywhere on the customer LAN.
This action verifies that connectivity exists and that the customer can log in to perform
administration or other tasks.
11. Use the Web browser to select Server > Interchange Servers to interchange the media
servers.
Note:
Ensure that you are connected to the active media server before you continue.
Note:
The system is ready to take over call processing.
12. Connect both IPSI control network B cables from both media servers to the Ethernet switch
for the standby IPSIs. These cables are the green CAT5 cables.
On the S8500 Media Server
Disconnecting the S8500 Media Server from the customer network
Note:
This procedure stops call processing.
Note:
To disconnect the S8500 Media Server from the customer network:
Remove the control network A cable from the S8500 Media Server.
●
On the S8710 Media Servers
Connecting the S8710 Media Servers to the control network
To connect the S8710 Media Servers to the control network:
1. Connect both S8710 Media Server IPSI control network A cables to the Ethernet switches.
These cables are the green CAT5 cables.
886 Upgrading, Migrating, and Converting Media Servers and Gateways