Avaya S8100 Series Manual page 1057

You can install the media processor and the CLAN circuit packs in any universal port slots.
However, for SCC1 and MCC1 carriers, you must place the media processors in the slots that
the EI circuit packs formerly occupied.
You must place the IPSI circuit packs in the slots that are specified in the following table.
IPSI slot locations
Carrier or Gateway
G650 stack
SCC1 EPN
MCC1 EPN containing one PN
MCC1 EPN containing two PNs
MCC1 EPN containing three
PNs
MCC1 EPN containing four PNs
MCC1 EPN containing five PNs
Slot Number
Primary
A01
A00
Tone Clock slot
●
(A00)
● Tone Clock slot
(A00)
E02
●
Tone Clock slot
●
(A00)
● B02
D02 (single control)
●
E02 (duplicated
●
control)
Tone Clock slot
●
(A00)
B02
●
C02
●
D02 (single control)
●
E02 (duplicated
●
control)
Tone Clock slot
●
(A00)
B02
●
C02
●
D02
●
E02
●
Conversion Tasks
Secondary, if duplicated
control, for S8700 series
only
B01
B01
B01
B01
D01
Control duplication is not
supported with three PNs.
D01 (duplicated control)
Control duplication is not
supported with four PNs
D01 (duplicated control)
Control duplication is not
supported with five PNs
Issue 2.1 June 2006 1057