Avaya S8100 Series Manual page 394

Migrating from a DEFINITY Server CSI in a CMC to an S8400 Media Server using Xmodem
Saving translations
This step is important in case you need to back out of the migration.
To save translations:
Note:
Save translations to a flash card.
Note:
1. Plug the PCMCIA/Compact Flash adapter in the PCMCIA slot on the TN798B or TN2402
Processor circuit pack.
2. Type save translation. Press Enter to save the translations to the PCMCIA.
The system displays a Command successfully completed message or an error message.
Verifying system status
Check which groups are in- or out-of-service before the migration. After the migration, compare
the after the migration list with the before the migration list to ensure that the lists are the same.
To verify system status:
1. To determine whether the system has administration, run the following commands:
a. list configuration all
b. list trunk-group
c. list hunt-group
If any command does not complete successfully, escalate the problem immediately. After
the migration, check the same administration to ensure that the translations are intact.
Recording all busyouts
To record busyouts:
1. Type display errors. Press Enter.
2. Look for type 18 errors and record any trunks that are busied out. You can return these
trunks to the busyout state after the migration/upgrade.
394 Upgrading, Migrating, and Converting Media Servers and Gateways