Avaya S8100 Series Manual page 458

Media servers and gateways
Hide thumbs Also See for S8100 Series:
Table of Contents

Advertisement

Migrating a DEFINITY Server CSI in a CMC to an S8500 Media Server
Recording all busyouts
To record busyouts:
1. Type display errors. Press Enter.
2. Look for type 18 errors and record any trunks that are busied out. You can return these
trunks to the busyout state after the migration/upgrade.
Recording node names and IP addresses
To record node names and IP addresses:
1. Note the node names and the IP addresses that are assigned to the TN2302AP IP Media
Processor and the TN799C/DP C-LAN circuit packs. Ensure that these names and
addresses are the same after the migration.
Note:
If the existing system has TN799C C-LAN circuit packs, you must replace these
Note:
circuit packs with TN799DP circuit packs.
2. To get the node names for the TN2302AP IP Media Processor and TN799C/DP C-LAN
circuit packs, type display ip-interfaces. Press Enter.
3. To get the IP addresses that match the node names, type list node-names. Press
Enter.
4. Record the information for use after the migration.
Saving translations
Although the migrated translations are already copied to the media server, you must save the
translations in case you need to back out of the migration.
Note:
Save translations to a flash card.
Note:
To save translations:
1. To save translations to the system disk, type save translation. Press Enter.
Either a Command successfully completed The message displays or all error messages
are logged.
458 Upgrading, Migrating, and Converting Media Servers and Gateways

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents