Avaya S8100 Series Manual page 335

Going to the Remote Feature Activation web site
The RFA web site automates some of the upgrade procedures, including generating a license
file.
1. At the Services laptop/PC browser, type
2. Using your SSO, log in to the RFA web site.
3. Follow the links to the RFA information page.
4. Complete the information necessary to create a license file.
If you have a direct connection to the switch:
1. Using your RFA Job Aids, run the Features Extraction Tool (FET) from the RFA web site to
create a Switch Configuration file.
2. When prompted, type in the transaction ID number.
3. The FET creates and uploads automatically the Switch Configuration file.
4. Do not deliver the license file at this time. You deliver and install the license later in this
upgrade procedure.
If you do not have a direct connection to the switch:
1. Run the Features Extraction Tool (FET) from the Services laptop/PC to create a Switch
Configuration file.
2. When prompted, type in the transaction ID number.
3. Use the FET instructions to create a new switch connection profile.
4. Create the Switch Configuration file.
5. Upload the Switch Configuration File to the RFA web site.
Deliver the license file to the Services laptop/PC for installation late in this procedure.
Connecting to the processor
To connect to the processor:
1. Connect the computer that you use to access the cabinet.
2. Start a SAT session using Native Configuration Manager or Avaya Site Administration.
3. Log in as craft.
http://rfa.avaya.com
Premigration administration
Issue 2.1 June 2006 335