Avaya S8100 Series Manual page 1186

Converting IP-PNC port networks with simplex control to duplicated control
Accessing the media server maintenance web interface
To access the media server:
1. Start the Web browser.
2. In the Address field, type 192.11.13.6. Press Enter to open the login Web page.
3. Log in as craft or dadmin.
4. Select yes to suppress alarms
The system displays the Integrated Management Standard Management Solutions
Maintenance Web page.
5. Click Launch Maintenance Web Interface to go to the main menu.
Configuring Control Network B
Control network A will already be assigned on the S8700-series Media Server pair. With the
addition of a duplicated IPSI, you must also assign Control network B. Control network B is
essentially the Ethernet port on the S8700 series Media Server, its connection to an alternate
Ethernet switch, the connection from the Ethernet switch to the duplicated IPSI.
Use the following steps to configure control network B on the server pair:
1. On the Maintenance Web page, select Configure Server.
2. Click Continue until the Copy Settings page appears.
The heading Specify how you want to use this wizard appears at the top of the page.
3. Select Configure individual services and click Continue.
The Configure individual services menu appears to the left.
4. Select Set Identities.
The Configure Server - Set Identities Web page appears.
5. On the Configure server - set identities page, select the interface that will be used for
Control Network B.
1186 Upgrading, Migrating, and Converting Media Servers and Gateways