Avaya S8100 Series Manual page 1032

Migrating from an S8700 or S8710 Media Server to an S8720 Media Server
Interchanging media servers (optional)
This section describes the procedures you must perform to interchange the media servers.
Accessing the standby media server
To access the standby media server:
1. Clear the ARP cache on the laptop if necessary. For more information, see
ARP cache on the laptop computer
2. Connect the laptop to the Services port (2) on the back of the media server with a
cross-connect CAT5 cable.
3. Open a browser and connect to the active media server.
4. Log in. For more information, see
interface
Interchanging media servers (optional)
To interchange the media servers to check capability of the standby media server to become the
active media server:
1. Under Server, click Interchange Servers.
The system displays the Interchange Servers window.
2. Verify the settings in the following fields:
Standby Busied: no
●
Standby Refreshed: yes
●
Standby Shadowing: on
●
Duplication Link: up
●
3. Click Interchange.
The system displays a confirmation message that the interchange has taken place.
This media server is now the active media server.
1032 Upgrading, Migrating, and Converting Media Servers and Gateways
on page 953.
on page 967 and return here.
Accessing the media server maintenance web
Clearing the