Avaya S8100 Series Manual page 542

Migrating a DEFINITY Server SI Direct-Connect in an MCC to a Direct-Connect
3. Check the LCD. Verify that the display shows the letters I and P and a filled-in V that shows
at the bottom
Figure 24: LED display that shows that the IPSI has a static IP address
Note:
Clear the ARP cache on the laptop before you connect to another IPSI. If you do
Note:
not clear the cache, the laptop appears to stop and does not connect to the next
IPSI. For more information, see
computer
4. Repeat steps 1 through 3 for each IPSI circuit pack.
Verifying IPSI translations
To verify IPSI translations:
1. Type list ipserver-interface. Press Enter.
2. Verify that the ISPI circuit pack(s) are translated.
The State of Health - C P E G column shows 0.0.0.0 for each healthy IPSI. If a "1" shows
in any position, you must troubleshoot the problem.
Tip:
The pattern 0.1.1.0 usually means that a cabinet type is administered
Tip:
incorrectly or a connectivity problem exists, such as an incorrectly terminated
cable.
542 Upgrading, Migrating, and Converting Media Servers and Gateways
(Figure 24: LED display that shows that the IPSI has a static IP
on page 468.
CLK
S
E
R
V
Clearing the ARP cache on the laptop
address).