Avaya S8100 Series Manual page 672

Migrating from a DEFINITY Server SI in an SCC to an S8700-Series Media Server with Fiber-PNC
Figure 36: Ribbon cable connector
8. Thread the ribbon through the slot on the front panel.
9. Attach the other end of the short ribbon cable to the top connector on the component side of
the TN775D Maintenance (EPN) circuit pack. Make sure the red line is on the bottom. See
Figure 37: Duplex ribbon cable connection
672 Upgrading, Migrating, and Converting Media Servers and Gateways
on page 673.