Avaya S8100 Series Manual page 1015

Configuring to allow restoring configuration data and translations
from the ftp server on the network
!
Important:
If you backed up files to the services laptop or the USB-connected Compact
Important:
Flash, do not perform this procedure. Go to
configuration data and translations from flash card or Services laptop
page 992.
If you backed up to the customer network, you must readminister the Ethernet port connecting
to the network. You must have the host name, IP address, subnet mask and default gateway for
the two media servers and the active server and the IP address for the Ethernet port connecting
to the customer's network.
To configure the network parameters:
1. Under Server Configuration, click Configure Server to open the first page of the Configure
Server process.
The system displays the Select Server type window.
2. Select the appropriate server type (IP-PNC or fiber-PNC). Click Continue.
If you are unsure of the server type, see
3. Click Continue through the Review Notices to get to the Specify how you want to use
this wizard page.
4. Select Configure individual services. Click Continue.
5. Click Set Identities from the main menu.
6. On the Set Server Identities window:
In the Host Name fields, fill out the host names for each server.
●
In the This is server number field, select the appropriate number. For example, if you
●
are on server 1, select 1.
Assign the Ethernet ports. Click Continue.
●
7. In the Configure Ethernet Interfaces window, fill in the correct IP addresses, Gateway,
and Subnet mask (or use the default addresses) for the Ethernet port connected only to the
customer LAN and select AUTOSENSE for the speed. This is because CNA, CNB, and
duplication values will be populated by the restore function.
Click Change to update the media server. When the screen shows
Successfully configured ethernet interfaces.
The Ethernet ports are configured.
8. Click Close Window to close the Configure Server wizard. Go to
the first S8720 Media Server to the network server
On the second S8720 Media Server
Configuring to allow restoring
Recording the server connection type
on page 993.
on
on page 957.
Verifying connectivity from
Issue 2.1 June 2006 1015