Avaya S8100 Series Manual page 1006

Migrating from an S8700 or S8710 Media Server to an S8720 Media Server
2. Lift the PCI riser cage thumbscrews and turn them counterclockwise to loosen them.
3. Remove the PCI riser cage.
4. Remove the blank expansion slot cover from the PCI riser cage (3,
card on page 981).
Figure 71: Installing the DAL1 card
5. Unlock the PCI retaining clip (1).
6. Carefully insert the DAL1 card into the middle slot of the PCI riser cage (4).
7. Lock the PCI retaining clip (2).
8. Align the PCI riser cage with the guides on the chassis and slide the riser cage into place.
9. Lift and turn the thumbscrew knobs clockwise while pressing down, until tightened.
10. Turn the thumbscrews counterclockwise to lower the thumbscrew knobs.
11. Install the access cover on the media server.
12. Press down on the hood latch handle to lock the access panel in place.
1006 Upgrading, Migrating, and Converting Media Servers and Gateways
4
3
Installing the DAL1
1
2
h3df87di LAO 110205