Avaya S8100 Series Manual page 300

Migration paths for S8500 Media Servers
When you migrate to an S8500, you can use the existing translations. The only supported
method to move translations from legacy systems is to:
1. Freeze the translations.
2. Send the translations to the Avaya Software Technical Support (STS) group.
STS then returns the translation reports and translation files by e-mail to the project manager
before the migration. For forms and more information, contact the STS scheduling desk at
720-444-9418.
These migration paths require that the media server is running Communication Manager
Release 1.2.x, 1.3.x, 2.0.x, or 2.1.x software before the migration. Upgrades from a release of
Communication Manager that is earlier than Communication Manager Release 1.3.1 require
that you install the preupgrade service pack before the upgrade to Communication Manager
Release 3.0.
An S8500 Media Server that is running Communication Manager Release 1.3.x or 2.x software
can support a configuration that has one or more local survivable processors (LSPs) that are
running Communication Manager Release 3.0.
An S8500 Media Server that is running Communication Manager Release 3.0 software can
support a configuration that has one or more LSPs or Enterprise Survivable Servers (ESSs).
The LSPs and ESSs must be running Communication Manager Release 3.0. For more
information see
300 Upgrading, Migrating, and Converting Media Servers and Gateways
Upgrades on page 63.