Avaya S8100 Series Manual page 686

Migrating from a DEFINITY Server SI in an SCC to an S8700-Series Media Server with Fiber-PNC
Connecting to the standby media server
To connect to the standby media server:
1. Start a Web browser.
2. Log in as craft or dadmin.
3. Click Launch Maintenance Web Pages.
4. Under Server, click Release Server.
5. Click Release.
Connecting to the active media server
To connect to the active media server, perform the following steps:
1. Start a Web browser.
2. Log in as craft or dadmin.
3. Click Launch Maintenance Web Interface.
4. Under Server, click Status Summary to verify that the standby media server was refreshed.
Do not continue until the standby media server is refreshed.
5. Open a SAT session with Native Configuration Manager or Avaya Site Administration.
6. Login as craft or dadmin.
Installing the translations
To install the translations:
1. Type reset system 4. Press Enter.
2. Return the STS-supplied PCMCIA flash card to Avaya.
To add the IPSI translations before you save the translations, continue with
translations to Communication Manager
Adding IPSI translations to Communication Manager
To add IPSI translations to Communication Manager:
1. Type change system-parameters ipserver-interface. Press Enter.
686 Upgrading, Migrating, and Converting Media Servers and Gateways
on page 686.
Adding IPSI