Avaya S8100 Series Manual page 1049

Prerequisites
This section lists the information and materials that you must have, and the tasks that you must
perform before you can start the conversion.
Before you go on site
Before you go on site, you must:
Complete the
●
Ensure that the Communication Manager software on the S8700-series Media Server is
●
Release 3.0 or later.
Accessing the media server maintenance web interface
To access the media server:
1. Start the Web browser.
2. In the Address field, type 192.11.13.6. Press Enter to open the login Web page.
3. Log in as craft or dadmin.
4. Select yes to suppress alarms
The system displays the Integrated Management Standard Management Solutions
Maintenance Web page.
5. Click Launch Maintenance Web Interface to go to the main menu.
Starting a SAT session
To start a SAT session:
1. Start a terminal emulation application, such as Native Configuration Manager or Microsoft
HyperTerminal or use a telnet session.
2. Type telnet 192.11.13.6 5023. Press Enter.
3. Log on as craft or dadmin.
4. Suppress alarm origination.
Presite checklist on page 1037.
Prerequisites
Issue 2.1 June 2006 1049