Avaya S8100 Series Manual page 1207

Checklist for converting a port network to duplicated TN2602AP IP Media Resource 320 circuit packs
2. In the Host Name (or IP address) field, type 192.11.13.6 if connecting to the services
port. Otherwise, for access over the LAN/WAN, type the IP address or the host name of the
server. Press Enter.
3. In the Port field, type 22.
4. Under Protocol, select SSH.
5. In the PuTTY menu on the left, click Connection > SSH.
The Options controlling SSH connections dialog box opens.
6. In the Preferred SSH protocol version field, select 2.
7. In the Encryption options window, use the up and down arrows to set AES (SSH-2) as the
top option and 3DES as the second option.
Note:
You can also customize the PuTTY tool with other settings, such as for color. For
Note:
documentation on PuTTY, see http://www.putty.nl/docs.html.
8. Click Open.
Note:
If you have not connected to this particular server before, SSH prompts you to
Note:
accept the server host key. If you save this key when prompted, you will not be
prompted if you connect again later. If you do not save the key, PuTTY prompts
you the next time you connect to this server.
When connecting through the Services laptop interface on the server, if you save the
host key, the host will be identified as 192.11.13.6. If you later connect to a different
server through its laptop interface, this new host also appears as 192.11.13.6, but it
will have a different key. You get a prompt in this case because it appears that the host
key has changed.
9. If necessary, click Yes to accept the server's host key.
The system displays the PuTTY window.
10. Log in as craft.
Checking software release
To verify the software version, perform the following steps.
1. Under Server click Software Version.
2. Look in the Reports as: field to verify that the new software is running correctly. If it is, see
the next step.
Issue 2.1 June 2006 1207