Avaya S8100 Series Manual page 1142

Converting some or all ATM port networks to IP-PNC
Figure notes:An IP-PNC configuration with duplicated control networks that was
converted from ATM
1. S8700 or S8710 Media Server.
2. Ethernet switch.
3. IPSI-connected PN (G650 Media Gateway stack, MCC1 Media Gateway, or SCC1 Media Gateway stack), consisting of at
least two media gateways or carriers. The figure shows an MCC1 Media Gateway.
4. PN control gateway or carrier in the A position that contains a TN2312AP/BP IPSI circuit pack for an IP connection to the
server.
NOTE: For the G650 Media Gateway, the BP version of the TN2312 is required in order to provide environmental
maintenance.
5. Duplicated control carrier in the B position that contains a TN2312AP/BP IPSI circuit pack for an IP connection to the
duplicated control network.
6. Port carrier with a TN2302AP IP Media Interface or a TN2602AP IP Media Resource 320.
7. N/A
8. IPSI-to-server control network connection through the Ethernet switch
9. IP-PNC PN (G650 Media Gateway stack,MCC1 Media Gateway, or SCC1 Media Gateway stack). The figure shows a G650
stack and an SCC1 stack.
10. PN control gateway or carrier in the A position that contains a TN2312AP/BP IPSI circuit pack for an IP connection to the
server.
11. Duplicated control gateway in the B position that contains a TN2312AP/BP IPSI circuit pack for an IP connection to the
server.
12. N/A
13. N/A
14. N/A
15. N/A
16. N/A
17. N/A
18. N/A
19. Customer LAN.
20. LAN connections of the TN2302AP IP Media Interface or the TN2602AP IP Media Resource 320 for voice processing, and
an optional TN799DP CLAN for control of IP endpoints. The CLAN circuit pack is required for downloads of firmware
updates.
21. LAN connections of the media servers for remote administration.
22. N/A
23. Duplicated server links, including the link for translations transfer and the link for control data sharing.
1142 Upgrading, Migrating, and Converting Media Servers and Gateways