Avaya S8100 Series Manual page 904

Migrating from an S8700 Media Server to an S8710 Media Server
Accessing the media server maintenance web interface
To access the media server:
1. Start the Web browser.
2. In the Address field, type 192.11.13.6. Press Enter to open the login Web page.
3. Log in as craft or dadmin.
4. Select yes to suppress alarms
The system displays the Integrated Management Standard Management Solutions
Maintenance Web page.
5. Click Launch Maintenance Web Interface to go to the main menu.
Clearing alarms
To clear alarms:
1. Perform one of the following actions:
If Communication Manager Release 1.x, under Alarms and Notification, click View
●
Current Alarms.
If Communication Manager Release 2.x, under Alarms, click Current Alarms.
●
2. Select the server alarms that you want to clear and click Clear.
3. Use SAT commands and a terminal emulation application, such as Native Configuration
Manager or MS HyperTerminal, to resolve any major alarms.
Note:
The following tasks
Note:
software release
on the active media server only.
Starting a SAT session
To start a SAT session:
1. Start a terminal emulation application, such as Native Configuration Manager or Microsoft
HyperTerminal or use a telnet session.
2. Type telnet 192.11.13.6 5023. Press Enter.
3. Log on as craft or dadmin.
4. Suppress alarm origination.
904 Upgrading, Migrating, and Converting Media Servers and Gateways
Starting a SAT session
on page 906 are SAT commands. You can perform these tasks
on page 904 through Checking the