Avaya S8100 Series Manual page 363

Documentation checklist for migrations
For a list of documents that are needed to perform the migration, see
Document
Quick Start for Hardware
Migration: Avaya S8400
Media Server in an Avaya
CMC1 or G600 Media
Gateway (03-300706)
Installing and Configuring
the Avaya S8400 Media
Server (03-300678)
Administration for Network
Connectivity for Avaya
Communication Manager
(555-233-504)
Migration tasks
The information in this section is based on the assumption that the media server complex is
installed, configured, and operational.
!
CAUTION:
This migration affects service because when you turn off the processor port
CAUTION:
network (PPN), the system drops all calls. Service returns when the media server
takes control of the IPSIs.
The general migration procedures are as follows:
Turn off the processor gracefully - preconversion administration
●
Replace the processor circuit pack or tone clock circuit pack with an IP Server Interface
●
(IPSI) circuit pack
Connect the IPSI circuit pack to the Ethernet switch on the customer network
●
Assign an IP address to the SIPI circuit pack
●
You can reuse the translations from the existing system when you migrate to an S8400 Media
Server.
Description
A quick reference guide that provides physical installa-
tion and connection information
Provides installation instructions for the S8400 Media
.
Server
Provides information on network connectivity
Migration tasks
Resources on page 54.
.
.
Issue 2.1 June 2006 363