Avaya S8100 Series Manual page 771

Restoring data for a migration
You cannot perform this procedure unless you first have received the conversion files from the
STS group and installed the files on the Services laptop.
Busying out the standby media server
To busy out the standby media server:
1. Connect to the Services port (2) on the back of the standby media server.
2. Start a Web browser.
3. Log in as craft or dadmin.
4. Click Launch Maintenance Web Pages.
5. Under Server, click Busy-out Server.
6. Click Busy Out.
Accessing the active media server from your laptop
To access the active media server:
1. Connect a cross-over cable to the Services port (2) on the back of the active media server.
2. Start the Web browser.
3. Type 192.11.13.6 in the Address field. Press Enter to bring up the logon Web page.
4. Log in as craft or dadmin.
5. Select yes to suppress alarms.
6. Click Launch Maintenance Web Interface to go to the Main Menu.
Busying out the active media server
To busy out the active media server:
1. Connect to the Services port (2) on the back of the active media server.
2. Start a Web browser.
3. Log in as craft or dadmin.
4. Click Launch Maintenance Web Pages.
5. Under Server, click Busy-out Server.
6. Click Busy Out.
Migrating translations
Issue 2.1 June 2006 771