Avaya S8100 Series Manual page 374

Migrating from a DEFINITY Server CSI in a CMC with an ATA Flash to an S8400 Media Server
3. Type read_csi_xln and press Enter to bring the CSI translations from the Compact
Flash to the /etc/opt/defty directory.
The system renames the translation files as xln1 and xln2.
4. Type cd /etc/opt/defty and press Enter.
5. Type ls -ltr and press Enter.
Verify that the xln1 and xln2 files are not zero length.
6. Open a SAT session.
7. Type reset system 4 and press Enter to load the restored translations into memory.
If the restore process fails, you get an error message with the reason for the failure. If that
happens, the translation file is not restored. Resolve the reason for the failure and restart the
process.
Post-migration administration
This section describes the post-migration administration to complete the migration to the S8400
Media Server.
!
Important:
When you format the compact flash card for use in the S8400 Media Server, all
Important:
data is erased from the compact flash card.
Note:
Do not use the compact flash card (Comcode 700381841) in an S8400 Windows
Note:
system. The operation system does not recognize the compact flash card.
After the migration, you can format the compact flash card (Comcode 700381841) for the S8400
Media Server and use the compact flash card as the backup compact flash card.
Assigning IP addresses to the SIPI circuit packs
When you use static IP addressing, you must assign IP addresses to the SIPI circuit packs.
374 Upgrading, Migrating, and Converting Media Servers and Gateways