Avaya S8100 Series Manual page 1157

Converting S8300 ICC mode to LSP mode
Introduction
This module provides a high-level list of tasks for converting an S8300B primary controller to
LSP mode without performing an upgrade. To complete these tasks, you will need the following
additional documents:
Installing and Upgrading the Avaya G700 Media Gateway and Avaya S8300 Media Server,
●
555-234-100. To obtain this document, go to
Installations, Migrations, Upgrades & Configurations; then select the appropriate
document.
Administrator Guide for Avaya Communication Manager, 03-300509.
●
In this scenario, an S8300B, configured as an ICC, is converted to an S8300B in LSP mode. In
both modes, the media server is running Communication Manager release 2.1 or later and no
software/firmware upgrade is performed.
The tasks include:
1. Administering the primary controller for the new LSP.
2. Moving the endpoints supported by the ICC to the new primary controller.
3. Updating the DHCP server alternate controller list.
4. Updating the gateway MGC list.
5. Configuring the S8300B as an LSP.
Follow the detailed procedures in Installing and Upgrading the Avaya G700 Media Gateway and
Avaya S8300 Media Server, 555-234-100, Issue 9, February 2006, for most of the tasks in this
conversion scenario.
http://support.avaya.com
Issue 2.1 June 2006
Introduction
and navigate to
1157