Avaya S8100 Series Manual page 961

To back up the configuration data and translations to the Services laptop:
1. On the services laptop, access the media server. For more information, see
media server maintenance web interface
2. Under Data Backup/Restore, click Backup Now.
The system displays the Backup Now window.
3. In the Backup Method section, select FTP.
4. Under Backup Method, fill in the fields for where you are backing up the files.
User Name field is anonymous
●
Password field is @
●
Host Name field is the IP address of the server being backup up
●
The Host Name field must use the host IP address.
Directory field is pub (Communication Manager Release 2.0 and later)
●
5. Click Start Backup.
6. Start > Run to open a command prompt session.
The system displays the Run window.
7. Type cmd. Press Enter.
8. Type ftp 192.11.13.6. Press Enter.
9. At the user prompt, type anonymous. Press Enter.
10. At the password prompt, type @. Press Enter.
11. At the ftp prompt, type bin. Press Enter.
12. Type cd pub (for Communication Manager Release 2.0 and later). Press Enter.
13. Type ls *.tar.gz. Press Enter.
The file will be listed as full......tar.gz.
Note:
For the following step, if the mget command is unavailable, use get.
Note:
14. Type mget filename.tar.gz where filename is the name of the backed up file. Press
Enter.
15. Type y. Press Enter.
16. Type bye. Press Enter.
17. At the prompt, type dir *.tar.gz. Press Enter to confirm the file is there.
On the active S8700 or S8710 Media Server
on page 953 and return here.
Accessing the
Issue 2.1 June 2006 961