Avaya S8100 Series Manual page 737

Media servers and gateways
Hide thumbs Also See for S8100 Series:
Table of Contents

Advertisement

Tip:
The pattern 0.1.1.0 usually means that a cabinet type is administered
Tip:
incorrectly or a connectivity problem exists, such as an incorrectly terminated
cable.
Verifying IPSI connectivity
To verify IPSI connectivity:
1. Under Diagnostics, click Ping.
2. Under Endpoints to Ping, select IPSIs with cab number (1–99) ___ carrier number ___.
3. Type the correct cabinet and carrier numbers in the text boxes.
4. Click Execute Ping.
5. Verify that the endpoints respond correctly.
Enabling control of the IPSI
To enable control of the IPSI:
Note:
Ensure that the IPSI has the same, current firmware.
Note:
!
CAUTION:
This procedure allows the media server to take control of the IPSI-controlled port
CAUTION:
network(s). Failure to complete the steps correctly can result in no connection to
the network.
1. Type change system-parameters ipserver-interface. Press Enter.
The system displays IP Server Interface (IPSI) System Parameters window.
2. Set the IPSI Control of Port Networks: field to enabled
3. Press Enter to effect the change.
4. Type save translation. Press Enter.
The media server now controls all the port networks.
Post-migration tasks
Issue 2.1 June 2006
737

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents