Migrating from an S8700 Media Server to an S8710 Media Server
5. Repeat one of the following procedures:
Backing up the Linux migration upgrade set to the network
●
or
Backing up the Linux migration upgrade set to the services laptop
●
return here
6. Continue with
Shutting down the S8700 Media Server
!
CAUTION:
Ensure that you are connected to the standby S8700 Media Server. If you are on
CAUTION:
the active S8700 Media Server, you will cause an interchange.
To shut down the standby S8700 Media Server:
1. Under Server, click Shutdown Server.
2. In the Shutdown This Server window:
Select Immediate Shutdown
●
Clear Restart Server after Shutdown
●
Select Shut down even if this is the active server
●
3. Click Shutdown.
4. Disconnect the laptop from the Services port.
5. Disconnect the power cord from the UPS.
On the first S8710 Media Server
Note:
The first S8710 Media Server becomes media server 1.
Note:
Turning on the media server
To turn on the media server:
Note:
You must place the CD-ROM in the drive before you turn on the media server.
Note:
910 Upgrading, Migrating, and Converting Media Servers and Gateways
Shutting down the S8700 Media Server
on page 907 and return here,
on page 908 and
on page 910.