Avaya S8100 Series Manual page 396

Migrating from a DEFINITY Server CSI in a CMC to an S8400 Media Server using Xmodem
Connecting to the SAT
To do connect to the System Administration Terminal (SAT):
1. Connect the Services laptop modem to an analog line.
2. On the Services laptop, click Start > Programs > Accessories > Communications >
HyperTerminal.
3. In the Connect To window, fill in the appropriate data. Click OK.
4. In the Connect window, verify the information. Click Dial.
5. At the login prompt, type craft and the password. Press Enter.
6. For the Terminal Type, type VT220. Press Enter.
You now are logged in to the SAT.
Copying translation files
To do copy the translation files:
1. On the SAT, type upload trans. Press Enter.
2. Click Transfer > Receive File.
3. In the Place received file in the following folder field, enter the location where the
translation files are to be placed.
4. In the Use receiving protocol field, select Xmodem. Click Receive.
5. In the Receive Filename window, in the file name field, type in a file name. Click OK.
6. In Xmodem file to receive window, in the Error checking field, CRC is shown and
attempts to upload the files three times and fails.
CRC then changes to Checksum and Xmodem starts the upload.
When the system finishes, the file is located in the directory designated in step 3.
Turning off power to all cabinets
!
CAUTION:
Ensure that you have done the premigration administration. For more
CAUTION:
information, see
To turn off power to all cabinets:
Turn off the power to each cabinet.
●
396 Upgrading, Migrating, and Converting Media Servers and Gateways
Premigration administration.