Avaya S8100 Series Manual page 1152

Converting S8300 LSP mode to ICC mode
3. Update the alternate
controller list on the
DHCP server.
See "Considerations
for IP Phones
Supported by a Local
Survivable Processor"
in Chapter 9.
4. Telnet to the MGP and
change the gateway's
controller list.
See "Setting up the
controller list for the
G700" in Chapter 9.
5. Backup all system files
— translations, OS,
and security backup
sets.
See "Backing up
S8300 system
recovery files" in
Chapter 12.
6. Record configuration
information.
See "Recording
configuration
information" in Chapter
11.
7. Restore default server
configuration settings
1152 Upgrading, Migrating, and Converting Media Servers and Gateways
Task
On the DHCP server
On the gateway's MGP
On the LSP to be converted
Steps/Comments
Clear the gateway's controller list.
●
Enter the IP addresses of the new ICC and
●
up to three alternate controllers.
If the media gateway is a G350, enter:
●
copy running-config
startup-config
Reset MGP.
●
These backup sets will not be restored on the
S8300B. They should be backed up in case it is
necessary to revert to the original configuration.
If you have not already done so, in the Record
Configuration Information task, record all of the
configuration information, regardless of the fact
that you are not upgrading Communication
Manager.
You will re-enter some of this information after the
conversion.
On the Maintenance Web Interface, click
Restore Defaults under Server Configuration.