Avaya S8100 Series Manual page 937

Prerequisites
You must complete the following tasks before you start the migration.
Presite checklist
●
Additional tasks
●
from an existing DEFINITY system.
Presite migration checklist
●
On site migration checklist
●
the migration.
Documentation checklist for migrations
●
while you perform the migration.
Tasks checklists
Presite checklist
Before you go on site, perform the following tasks
:
Task
Verify that your Services
laptop has the appropriate
hardware.
Verify that your Services
laptop has the appropriate
software.
on page 937. Perform these tasks before you go on site.
on page 939. Perform these tasks on site before you start the migration
on page 940. Perform these tasks before you go on site.
on page 941. Perform these are tasks on site before you start
Description
Correct hardware components include:
●
●
●
●
●
●
●
Correct software components include:
●
●
●
●
on page 941. Have these documents ready to use
40 MB available disk space
direct Ethernet cable
serial cable and adapter
RS-232 port connector
Network interface card (NIC) with a 10/100
BaseT Ethernet interface
10/100 BaseT Ethernet, category 5, or better,
crossconnect cable with an RJ45 connector on
each end, MDI to MDI-X
CD-ROM drive
Windows 2000/XP operating system
Terminal emulation program: HyperTerminal or
other
TCP/IP networking software: bundled with
Windows OS
Web browser: Internet Explorer 5.0 or later
Basic Migration Steps
1 of 3
Issue 2.1 June 2006 937