Avaya S8100 Series Manual page 378

Migrating from a DEFINITY Server CSI in a CMC with an ATA Flash to an S8400 Media Server
Resetting the SIPI
To reset the SIPI:
1. Type reset. Press Enter
Answer Y to the warning.
Note:
Resetting the SIPI terminates the administration session. If further administration
Note:
is required, start a new telnet session to the SIPI.
Note:
Control network settings become effective when you exit the IPADMIN session.
Note:
Control settings include the IP address, the subnet mask, and the gateway.
2. Disconnect the Services laptop from the faceplate.
3. Check the LCD. Verify that it has an I P with a filled-in V that shows at the bottom. For more
information, see
Figure 5: LED display that shows that the SIPI has a static IP address
Note:
Clear the ARP cache on the laptop before connecting to another SIPI. If the
Note:
cache is not cleared, the laptop appears to stop and does not connect to the next
IPSI. For more information, see
computer
4. Close the window.
378 Upgrading, Migrating, and Converting Media Servers and Gateways
Figure 5: LED display that shows that the SIPI has a static IP
on page 346.
CLK
ETR
S
E
R
V
Clearing the ARP cache on the laptop
address.