Avaya S8100 Series Manual page 628

Migrating a DEFINITY Server CSI in a CMC to an S8700-Series Media Server with IP-PNC
Document
Installing and Configuring
an Avaya S8700-Series
Media Server (03-300145)
Job Aid: Server and CSS
Separation - Avaya
S8700-Series Media Server
(555-245-766)
Migration tasks
The information in this section is based on the assumption that the media server complex is
installed, configured, and operational.
!
CAUTION:
This migration affects service. When the PPN is turned off, the system drops all
CAUTION:
calls. Service returns when the media server takes control of the IPSIs.
The following list describes the general migration procedures:
Turn off the processor gracefully - pre-conversion administration
●
Replace the processor circuit pack or tone clock circuit pack with an IP Server Interface
●
(IPSI) circuit pack
Connect the IPSI circuit pack to the Ethernet switch on the customer network
●
Assign an IP address to the IPSI circuit pack
●
You can reuse the translations from the existing system when you migrate to an S8500 Media
Server.
Perform these tasks to convert a processor port network to a port network (CMC).
Premigration administration:
Connecting to the media server
●
Verifying system status
●
Recording all busyouts
●
Recording node names and IP addresses
●
Saving translations
●
628 Upgrading, Migrating, and Converting Media Servers and Gateways
Description
Provides installation instructions for the S8710 and
S8720 Media Servers.
Provides information on and connectivity diagrams
when the S8710 or S8720 Media Servers are in
separate locations.
on page 630
on page 631
on page 631
on page 632
on page 631