Avaya S8100 Series Manual page 1226

Converting software duplication link to a DAL1 link on an S8720 Media Server
Removing the top cover from the server
To remove the top cover from the server:
1. Lift the locking tab on the top cover of the server as shown in
Figure 105: Remove the cover from the server
Figure notes:
1. Locking tab
Lifting the tab slides the locking tabs of the cover free of the front panel.
2. Lift the cover straight up and set it aside.
Removing the riser assembly
To remove the riser assembly:
1. Release the two thumbscrews (Note 1 in
1226 Upgrading, Migrating, and Converting Media Servers and Gateways
1
d i
COM s c PAC
T
1
2
UI D
2. Cover slides back for removal.
Figure 106).
Figure 105
2
h3df8cvr LAO 101905