Avaya S8100 Series Manual page 1036

What is covered in the Conversions Section
Table 20 summarizes the conversion procedures this section covers.
Table 20: Possible conversion paths
From
S8500 and S87xx
1
Fiber-PNC
S8500 and S87xx mixed
fiber and IP-PNC
S8300 LSP
S8300 ICC
S8500 Main
S87xx simplex control
S87xx simplex bearer
S87xx software
duplication
1. Fiber-PNC configurations for the S8700-series Media Server include direct connect, CSS, and ATM.
Fiber-PNC configurations for the S8500 Media Server include only direct connect.
What is not covered in the Conversions Section
This section does not cover changes from a DEFINITY communications system to an IP-PNC
or a fiber-PNC Linux-based system. For example, changes from a ProLogix, DEFINITY One, or
an IP600 system to an IP-PNC or fiber-PNC Linux-based system are not covered in this section.
These procedures are considered to be migrations and are covered in the
some cases, however, you might need to use the procedures from both sections.
1036 Upgrading, Migrating, and Converting Media Servers and Gateways
To
IP-PNC
All Mixed
IP-PNC Fiber-PNC
and
IP-PNC
Configuration Conversions
✔
✔
Mode Conversions
S8300
mode
ICC LSP
✔
✔
✔
✔
S8500/S87xx mode
Dup.
Dup.
LSP cont
bearer
rol
✔
✔
✔
Migrations section. In
DAL1
dup.
✔