Avaya S8100 Series Manual page 1227

Figure 106: Remove the riser assembly
h3df87cr LAO 102505
Figure notes:
1. Loosen both thumbscrews.
2. Lift the riser assembly straight up and set it on the antistatic mat.
Inserting the DAL1 circuit pack
To insert the DAL1 circuit pack:
1. Remove the DAL1 circuit pack from its protective packaging and set the circuit pack on the
antistatic mat beside the riser assembly.
2. Align the circuit pack with the riser assembly and push the circuit pack into the slot above
the quad-NIC circuit pack (see
1
2. Lift riser assembly straight up.
Figure 107).
2
3
2
C I
V D
Issue 2.1 June 2006
1
3
G z
0 M
1 0
2
G z
0 M
1 0
1
G z
3 M
1 3
1227