Avaya S8100 Series Manual page 318

Migrating to an Avaya S8400 Media Server
Migrating from a DEFINITY Server CSI in a CMC using Xmodem
When you migrate from a DEFINITY Server CSI in a CMC to an S8400 Media Server using
Xmodem:
1. Copy the translations to the Compact Flash card in the PCMCIA slot on the TN798B
Processor circuit pack.
2. Copy the translations onto the Services laptop.
3. Copy the translations to the S8400 Media Server.
Migrating from an S8100 using ftp
When you migrate from an S8100 to an S8400 Media Server using ftp:
1. On the SAT, copy the translation files.
2. Move the translations onto the Services laptop.
3. Copy the translations to the S8400 Media Server.
Migrating all other systems
When you migrate to an S8400, you can use the existing translations. The only supported
method to move translations from legacy systems is to:
1. Copy the translations to the Compact Flash.
2. Copy the translation files from the Compact Flash to the S8400 Media Server.
Migrating from existing DEFINITY and Linux platforms
Use these procedures to migrate from existing DEFINITY systems to the Avaya S8400 Media
Server with limited out-of-service time. The existing systems must be standard reliability. In all
instances, the cabinets can be reused as a port network (PN). You do not need a G650 Media
Gateway.
You can migrate the following existing systems:
DEFINITY Server CSI in a Compact Modular Cabinet (CMC)
●
DEFINITY ONE in a CMC
●
Avaya IP600/S8100 in a G600
●
318 Upgrading, Migrating, and Converting Media Servers and Gateways