Avaya S8100 Series Manual page 1028

Migrating from an S8700 or S8710 Media Server to an S8720 Media Server
On the active (first) S8720 Media Server
This section describes the procedures you must perform on the active (first) S8720 Media
Server.
Accessing the active media server
To access the active media server:
1. Clear the ARP cache on the laptop if necessary. For more information, see
the active media server
2. Connect the laptop to the Services port (2) on the back of the media server with a
cross-connect CAT5 cable.
3. Open a browser and connect to the active media server.
4. Log in. For more information, see
interface
Resolving alarms
To resolve alarms:
1. Under Alarms and Notification, click Current Alarms.
The system displays the Current Alarms window.
2. Select the server alarms to be cleared. Click Clear.
3. Resolve new alarms since the migration with SAT commands. For more information, see:
Maintenance Commands for Avaya Communication Manager 2.1, Media Gateways and
●
Servers
Maintenance Alarms for Avaya Communication Manager 2.1, Media Gateways and
●
Servers
Enabling scheduled maintenance
To schedule daily maintenance:
Reset the settings that were recorded in
●
1028 Upgrading, Migrating, and Converting Media Servers and Gateways
on page 950 and return here.
on page 953.
Accessing the media server maintenance web
Disabling scheduled maintenance
Connecting to
on page 955.