Avaya S8100 Series Manual page 624

Migrating a DEFINITY Server CSI in a CMC to an S8700-Series Media Server with IP-PNC
Task
Be sure to do this step
before you freeze
translations.
On the IP Services screen
in the Service Type field,
remove Alarm1 and
Alarm2.
Be sure to do this step
before you freeze
translations.
On the Trunk Group
screen, change the
Measured field from
measured to none.
Be sure to do this step
before you freeze
translations.
Check the Dial Plan screen
(or Dial Plan Analysis
Table screen depending on
the release) for 0 assigned
as attd.
Replace any TN775/B/C
maintenance circuit packs.
About 2 weeks before the
migration, freeze the
translations.
Use a flash card to collect
the translations locally.
624 Upgrading, Migrating, and Converting Media Servers and Gateways
Description
You first might need to change the System
Parameters Maintenance screen before you can
make any changes to the IP Services screen.
This action indicates that trunk group measurement
reports are not required. Remember to remeasure
trunk groups.
Type list trunk-group to get a list of the trunk
groups that are "measured" and need to be changed.
If none, check the Attendant Console screens for
any buttons with attd-qcalls or attd-qtime btns.
Remove these if 0 is not assigned as attd.
Replace the TN775/B/C circuit packs with TN775D
circuit packs in any EPN that controls an IPSI.
For more information on where and how to send the
translations, contact the STS scheduling desk at
720-444-9418.
STS updates the translations to the latest version. This
process can take 2 weeks. STS returns the translation
reports and translation files to the project manager by
e-mail who sends them to the technical support
representative.
For forms and more information, contact the STS
scheduling desk at 720-444-9418.
3 of 4