Avaya S8100 Series Manual page 1223

Converting software duplication link to a DAL1 link
on an
S8720 Media Server
!
Important:
Always check the Avaya Support Web site for Product Support Notices at
Important:
support.avaya.com
Notices.
This module describes the steps required to replace a software duplication link on an S8720
Media Server with the DAL1 duplication circuit pack (Material code 700262306):
Before you start
●
Removing power from the server(s)
●
Removing the server from the rack
●
Removing the top cover from the server
●
Removing the riser assembly
●
Inserting the DAL1 circuit pack
●
Replacing the riser assembly
●
Replacing the cover on the server
●
Replacing the server in the rack
●
Restoring power to the server(s)
●
Connecting to the active media server
●
Accessing the media server maintenance web interface
●
Reconnecting the duplication cables
●
Reconfiguring the Ethernet interface
●
Checking system status
●
Before you start
Verify that you have the following on site:
DEF CP DAL1 (Material code 700262306) replacement duplication circuit pack
●
Electrostatic wrist ground strap and mat
●
and select Communication Manager > Product Support
on page 1223
on page 1224
on page 1225
on page 1226
on page 1227
on page 1228
on page 1230
on page 1230
on page 1231
on page 1235
on page 1226
on page 1232
on page 1232
on page 1233
on page 1234
http://
Issue 2.1 June 2006 1223