Avaya S8100 Series Manual page 1027

Verifying the second S8720 Media Server is in standby state
To verify the second S8720 Media Server is in a standby state:
1. On the Maintenance Web Interface, click Server > Status Summary.
The system displays the Status Summary window.
2. Verify the Mode field is Standby.
3. Check the following:
Standby Busied is no
●
Standby Refreshed is yes
●
Standby Shadowing is on
●
4. To verify the process status, click Server > Process Status.
The system displays the Process Status window.
5. Under Frequency, click Display Once.
6. Click View.
7. Verify all operations are Standby except ENV that can be off.
Releasing alarm suppression (optional)
If you complete the migration well before the time set when you suppressed alarming, you might
want to release alarm suppression manually rather than wait.
1. Use the PuTTY application to reaccess the server using the secure shell (SSH) protocol.
2. Log in as craft or dadmin.
3. Type almsuppress -n. Press Enter to release alarm suppression.
4. Log off.
Logging off all administration applications
When you have completed all the administration, log off all the applications used.
Disconnecting from the second S8720 Media Server
Disconnect the Services laptop from the second S8720 Media Server.
On the second S8720 Media Server
Issue 2.1 June 2006 1027