Avaya S8100 Series Manual page 495

Figure 12: Ribbon cable connector
5. Push the tabs on the ends of the connector inward to lock the connector in place.
6. Thread the ribbon through the slot on the front panel
connection on page 496).
7. Insert the TN775D Maintenance (EPN) circuit pack part way into the MAINTENANCE slot.
8. Attach the other end of the short ribbon cable to the top connector on the component side of
the TN775D Maintenance (EPN) circuit pack with the red line on the bottom
reliability ribbon cable connection
caxxinst LJK 022002
(Simplex reliability ribbon cable
on page 496).
Migration tasks
(Simplex
Issue 2.1 June 2006 495