Avaya S8100 Series Manual page 955

Disabling scheduled maintenance
To prevent scheduled daily maintenance from interfering with the upgrade:
1. Type change system-parameters maintenance. Press Enter.
2. Record the settings for the Stop Time and Start Time fields.
3. If scheduled maintenance is in progress, set the Stop Time field to 1 minute after the
current time.
or
If scheduled maintenance is not in progress, set the Start Time field to a time after the
upgrade is completed.
For example, if you start the upgrade at 8:00 P.M. and the upgrade takes 90 minutes, set
the Start Time field to 21:30.
Busying out MMI circuit packs with SAT for a duplicated control
network only
(main server only)
!
CAUTION:
Multimedia-to-voice station calls are not preserved on an upgrade. If you do not
CAUTION:
busyout the TN787 Multimedia Interface (MMI) circuit packs, the TN787 and
TN787 Multimedia Voice Conditioner ports cannot be used.
To locate all the MMI circuit packs that need to be busied out:
1. Type display system-parameters customer-options. Press Enter.
2. Under the Multimedia Call Handling (MMCH) options, select Basic and Enhanced fields.
3. If either the Basic or Enhanced field is set to y, type list configuration all. Press
Enter to locate all MMI (TN787) circuit packs.
4. If MMI circuit packs exist, type busyout board UUCSS where UU is the cabinet, C is the
carrier, and SS is the slot.
5. Press Enter for each MMI circuit pack.
On the active S8700 or S8710 Media Server
Issue 2.1 June 2006 955