Avaya S8100 Series Manual page 591

Copying translation files to media server
To copy translation files to the media server:
1. Under Miscellaneous, click Download Files.
2. Click Files(s) to download from the machine I'm using to connect to the server.
3. Click Browse and select the file that you saved on the Services laptop.
4. Click Download to place a copy of the file on the media server.
Administering the IPSIs
To administer the IPSIs:
1. Type change system-parameters ipserver-interface. Press Enter
2. Verify that the Primary Control Subnet Address field is correct.
The subnet address must match the most significant three octets (the first three groups of
digits in the subnet address) of the server IP address that is listed on the control network
entry from the completed Electronic Preinstallation Worksheet (EPW).
An asterisk (*) to the right of the Subnet Address field means that although a subnet
address displays, this address is incorrect. Avaya Communication Manager does not have
the subnet information. After you verify the information shown on the screen, submit this
form with or without changes to update the Communication Manager with the correct subnet
information.
!
CAUTION:
If the information in the Primary Control Subnet Address field is incorrect, you
CAUTION:
must change the information on the media server. Use the Maintenance Web
Interface. Under Server Configuration and Upgrades, click Configure Server to
change the media server configuration. Then continue with step 3 of this
procedure.
3. Verify that the Switch Identifier field is set correctly for this installation. You must enter the
correct switch identifier here before you administer the TN2312 IPSI circuit packs.
4. Verify that the IPSI Control of Port Networks field is set to disabled.
5. Press Enter.
Migrating translations
Issue 2.1 June 2006 591