Installing or converting to an S8500 LSP
To verify that the ports are open, perform the following steps:
1. click Firewall under the Security heading in the maintenance web interface.
The Firewall Web page appears.
Note:
The ftp, telnet, and tftp services are not required.
Note:
2. In the Input to Server column, ensure that the check box for snmp is selected.
3. Click the Advanced Setting button.
The advanced firewall settings Web page appears.
4. Verify that the following defaults are set:
Output to server is selected for gateway compatibility, ports 1024:65535
●
Input to server is selected for ip-signaling-1, ports 5000:5021/tcp
●
Input to server is selected for ip-signaling-2, ports 5024:9999/tcp
●
Input to server is selected for h248message, port 2945/tcp
●
1178 Upgrading, Migrating, and Converting Media Servers and Gateways