Avaya S8100 Series Manual page 773

4. Click Launch Maintenance Web Interface.
5. Under Server, click Status Summary to verify that the standby media server is refreshed.
Do not continue until the standby media server is refreshed.
6. Start a SAT session with Native Configuration Manager or Avaya Site Administration.
7. Log in as craft or dadmin.
Installing the translations
To install the translations:
1. Type reset system 4. Press Enter.
2. Log in to a SAT session.
3. Type list station. Press Enter.
Verify that you have the current translations.
To add the IPSI translations before you save the translations, see
the existing hardware
Connecting to the standby media server
To connect to the standby media server:
1. Connect to the Services port (2) on the back of the standby media server.
2. Start a Web browser.
3. Log in as craft or dadmin.
4. Click Launch Maintenance Web Pages.
5. Under Server, click Release Server.
6. Click Release.
Adding IPSI translations to Communication Manager
To add IPSI translations to Communication Manager:
1. Type change system-parameters ipserver-interface. Press Enter.
on page 776.
Migrating translations
Upgrading and administering
Issue 2.1 June 2006 773